Beli shell tellus 32 di monotaro.id

Shell TellusS2 M 100Industrial Hydraulic FluidShell Tellus S2 M fluids are high performance hydraulic fluids that use Shell's unique patented technology to provide outstanding protection and performance in most manufacturing and many mobile equipment operations. They resist breakdown under heat or mechanical stress and help prevent damaging deposit formation that can decrease the efficiency of your hydraulic power system.Main Application- Industrial hydraulic systemsWith an extensive range of equipment maker approvals and recommendations, Shell Tellus S2 M fluids are suitable for a wide range of hydraulic power applications found in manufacturing and industrial environments.- Mobile hydraulic fluid power transmission systemsShell Tellus S2 M fluids can be used effectively in mobile hydraulic power applications such as excavators and cranes, except where significant ambient temperature variations are encountered. For these applications we recommend the Shell Tellus "V" series.- Marine hydraulic systemsSuitable for marine applications where ISO HM category hydraulic fluids are recommended.Specifications, Approvals & Recommendations- Denison Hydraulics (HF-0, HF-1, HF-2)- Cincinnati Machine P-68 (ISO 32), P-70 (ISO 46), P-69- (ISO 68)- Eaton Vickers M-2950 S- Eaton Vickers I-286 S- Listed by Bosch Rexroth Ref 17421-001 and RD 220-1/ 04.03- ISO 11158 (HM fluids)- AFNOR NF-E 48-603- ASTM 6158-05 (HM fluids)- DIN 51524 Part 2 HLP type- Swedish Standard SS 15 54 34 AM- GB 111181-1-94 (HM fluids)For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk, or the OEM Approvals website. Compatibility & Miscibility- CompatibilityShell Tellus S2 M fluids are suitable for use with most hydraulic pumps. However, please consult your Shell Representative before using in pumps containing silver plated components.- Fluid CompatibilityShell Tellus S2 M fluids are compatible with most other mineral oil based hydraulic fluids. However, mineral oil hydraulic fluids should not be mixed with other fluid types (e.g. environmentally acceptable or fire resistant fluids).- Seal & Paint CompatibilityShell Tellus S2 M fluids are compatible with seal materials and paints normally specified for use with mineral oils.

ACER ID oils are high quality oils for use in circulation systems and in hydraulics circuits. They are obtained from selected paraffinic base stocks treated with antioxidant and antirust additives (R & O oils, ISO-L-DAB, ISO-L-HL classifications).They are available in many grades that cover a very broad range of viscosity and are therefore able to meet all requirements of practical interest.

Shell Tellus S3 M 46Premium Zinc-Free Industrial Hydraulic FluidShell Tellus S3 M hydraulic fluids are high performance lubricants that use exclusive zinc-free technology to provide outstanding protection and performance in most manufacturing and many mobile equipment operations. They resist breakdown under heat or mechanical stress, helping to prevent damaging deposits that can decrease the efficiency of your hydraulic system.Main Applications- Manufacturing and industrial hydraulic systemsShell Tellus S3 M fluids are suitable for a wide range of hydraulic power applications found in manufacturing and industrial environments.- Severe duty hydraulic serviceThe long-life characteristics of Shell Tellus S3 M fluids can make them particularly suitable for severe duty (e.g. load, temperature) applications or where extended life is required (e.g. Remote or inaccessible locations).- Marine and mobile hydraulic systemsShell Tellus S3 M fluids are suitable for marine and mobile applications where ISO HM type hydraulic fluids are recommended.- Low toxicity towards the environmentShell Tellus S3 M has a reduced environmental impact in the event of a leak or accidental spillage compared to conventional zinc-based hydraulic fluids. This is achieved through the use of zinc-free anti-wear technology and low sulphur base oils. Shell Tellus S3 M is classified as 'not harmful' to freshwater and marine invertebrates when tested as water-accommodated fractions (WAFs) according to OECD and EPA test guidelines.For further reductions in environmental impact, we offer the Shell Naturelle range of environmentally considerate lubricants.For applications that experience wide temperature variations we recommend the Shell Tellus "V" series of hydraulic fluids.Specifications, Approvals & Recommendations- Denison Hydraulics (HF-0, HF-1 and HF-2)- Eaton Vickers (Brochure 694)- Fives Cincinnati P-70 (ISO 46)- ISO 11158 (HM fluids)- DIN 51524-2 (HLP oils)- ASTM 6158 (HM mineral oils)- SS 15 54 34 MFor a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.Typical Physical Characteristics Compatibility & Miscibility- CompatibilityShell Tellus S3 M fluids are suitable for use with most hydraulic pumps.- Fluid CompatibilityShell Tellus S3 M fluids are compatible with most other mineral oil based hydraulic fluids. However, mineral oil hydraulic fluids should not be mixed with other fluid types (e.g. environmentally acceptable or fire-resistant fluids).- Seal & Paint CompatibilityShell Tellus S3 M fluids are compatible with seal materials and paints normally specified for use with mineral oils.Health, Safety & Environment- Health & SafetyGuidance on Health and Safety is available on the appropriate Material Safety Data Sheet.- Protect the EnvironmentTake used oil to an authorised collection point. Do not discharge into drains, soil or water.Additional Information- AdviceAdvice on applications not covered here may be obtained from your Shell representative.

Shell Gadus S1 OG 200Open Gear and Wire Rope GreaseShell Gadus S1 OG are a range of high viscosity, residual-type (bituminous) lubricants, which are recommended principally for open gears, sugar mills and wire rope applications which require an adhesive, high load-carrying, EP product. All grades are blends of bitumen and heavy mineral based oils, blended in different proportions to suitvarious applications.Specifications, Approvals & RecommendationsFor a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.Health, Safety & Environment- Health and SafetyShell Gadus S1 OG is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained.Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.- Protect the EnvironmentTake used oil to an authorised collection point. Do not discharge into drains, soil or water.Additional Information- AdviceAdvice on applications not covered here may be obtained from your Shell representative.

Specifications and approvalsApproved by or meets David Brown, Cincinnati Machine, and many other equipment manufacturersIndustry standards: ANSI/AGMA 9005-E02 (EP); ISO 12925-1 CKD; DIN 51517-3 (CLP); US Steel 224

- Pelumas dengan premium mineral - Keunggulan: Membersihkan lebih dengan menghilangkan endapan kotoran dari pelumas mineral sebelumnya - Menjaga performa mesin tetap stabil - Cocok dipakai untuk usia kendaraan 8-12 tahun.

Untuk pengendara yang mengineginkan perlindungan canggih terhadap mesin apapun tantangan berkendaranya.- Pelumas mesin fully Synthetic - Sesuai untuk mesin modern

Shell Turbo CC 46Premium Quality Industrial Gas, Steam & Combined Cycle Turbine OilsShell Turbo Oils CC have been developed to meet the severe demands imposed by modern, heavy duty turbine applications, exceeding OEM specifications for both gas and steam turbines. A patented, metal free additive technology, ensures that these products offers substantially improved performance over conventional turbine oils. Th unique combination of excellent oxidation and thermal stability, coupled with the resistance to formation of deposits and varnish, sludge control and surface properties make Shell Turbo Oils CC an excellent choice lubricant for emerging combined cycle turbine technology, as well as existing gas and steam turbine plants.Main ApplicationsPower generation combined cycle turbines. Industrial steam turbines.Industrial gas turbines.Specifications, Approvals & Recommendations- Siemens TLV 9013 04 & TLV 9013 05- Alstom HTGD 90-117- General Electric GEK 28143A, GEK 32568f, GEK 46506E, GEK 101941A and GEK 107395a- Siemens-Westinghouse 21 T0591 & 55125Z3- Siemens/ Mannesmann Demag 800 037 98 TD 32 / TD 46- Solar ES 9-224W Class II- DIN 51515 Part 1 L-TD & Part 2 L-TG- ISO 8068 L-TGB & L-TGSB- GEC Alstom NBA P50001A- ASTM D 4304-06a Type I, II & III- Skoda : Technical Properties Tp 0010P/ 97 use in steam turbines.For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk, or the OEM Approvals website.Health, Safety & Environment- Protect the EnvironmentTake used oil to an authorised collection point. Do not discharge into drains, soil or water.Additional Information- AdviceAdvice on applications not covered here may be obtained from your Shell representative.

Shell Rimula R4 X menawarkan tiga perlindungan bagi truk dan usaha Anda. Pelumas ini mengandung kombinasi optimal aditif khusus agar mesin lebih tahan lama, lebih bersih, dan lebih terlindungi.

i - SIGMA PLUS ID is high performance lubricants for high output naturally aspirated and super-charged Diesel engines operating under very severe duty or which are subject to deposit formation or excessive wear due to design characteristics or to the fuel employed.It is formulated using large percentage of additives to impart superior detergency together with high dispersant, antioxidant, anticorrosion, and anti wear properties.The SAE grade 10W is also suitable to be employed in hydraulic circuits of various equipments (earthmovers, loaders, etc) where an engine oil of such a viscosity grade is prescribed.

The BLASIA ID series has been developed to meet the widest range of requirements of EP( Extreme Pressure ) lubrication such as, for instance gears, operating under severe duty ( ISO-L-CKD classification ).The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which ensure good high-speed and shock-load performance) and phosphorus compounds ( for low-speed and high-load performance). They thus satisfy the widest range of operational requirements.

eni OTE ID products are designed to satisfy even the most severe lubrication requirements of steam, gas and water turbines. All grades are formulated utilizing highly refined group II base stocks with the latest technology additive. The wide range of viscosities available ensures that all possible lubricating requirements can be met.

Nuto H Series adalah oli hidraulis anti-aus kualitas prima untuk aplikasi layanan industri dan layanan bergerak yang bekerja pada kondisi operasi sedang dan mensyaratkan pelumas anti-aus.Ketahanan oksidasi dan stabilitas kimia yang efektif mendukung daya tahan oli yang baik dalam aplikasi sedang hingga berat.

HYSPIN AWS 68 & HYSPIN AWS 46ANTI-WEAR HYDRAULIC OILSZinc-based hydraulic oils for use in all types of hydraulic pumps where pressures and speeds require anti-wear protection.